New Version of SAMIL SolarPower Browser™ (v3.1.0.0)

Last version I used was v2.9.2.6

v3.1.0.0 is now available on the SAMIL support site in zip format

I've downloaded it so I'll post my findings after I've installed it and run it up.

Anyone else used this newer version yet?

About 20mins later ... (19:55)
Software v3.1 is installed and operational.
First up it wouldn't find the inverter so I rebooted the inverter 
by going into Network Settings and selecting the Ethernet option  and OK'ing out.
I'm now sitting here watching the inverter appear and disappear in the SolarPower Browser
as it reboots itself multiple times ... we are up to the fourth appearance ...
five ...
six ...
seven ...
eight ...
... no new events in the history, just rebooting over and over...
nine ...
ten ...
... software seems a little different in content but nothing useful in terms of controlling the networking
eleven ...
twelve ...
 (20:10) I'll come back later and see if it's still rebooting ...
... constantly restarting can't be good for it  ...

Now 22:53 and still rebooting itself every few minutes! 
I've physically disconnected it from the network , though I've never found a way to remove
the WIFI settings once they've been successfully entered!
Short of disconnecting it from the mains I can see no way of stopping it from
continually restarting ... hopefully it will come good when the solar is applied tomorrow!!

For the money it cost, I really am very unimpressed with the firmware in this thing!
If you didn't want to monitor and manage it ... i.e. just let it sit on the wall and generate, 
it would be fine, but one of the reasons I bought this brand 
was because of its supposed manageability.

Latest update on TRYING to Network our
SAMIL River 5200TL-D Solar Inverter

Firmware versions

Previous post in this series

Next Post in this series

Details of the IES installation

  In response to my Question to Samil ...

Can you please clarify/verify the firmware versioning, as it appears our new inverter has a later version(v1.10) than what is contained in the RAR file you sent me(v1.2)

(The original inverter was v1.02)

As an aside, the new inverter (running firmware v1.10) continues to mis-record values on a sporadic basis just like the first unit;

One sunny day (about the same amount of sun as those either side of it) the inverter decided to record 0.04KW for the day!

On three occasions now, it appears to have not reset the previous days total and continued to accrue the subsequent day’s generation to effectively have double the normal value on the second day!

I haven’t even bothered to try and re-connect it via WiFi/LAN to log the data as it will not stay connected to the network long enough to be worth my time!
Regards Colin

The Samil response was ...

 Hi Colin,

The v1.2 is the latest firmware version which fix the power record issue.

I admit that the R&D is working on the wifi dropping off randomly issue right now.

The temporary solution I recommend to J is to monitoring his system via the VIplant, which is a more stable firmware.

My reply was of-course ...

Thanks M

I may have a go at the firmware update this weekend then.

I must reiterate that there is ABSOLUTELY NO POINT TRYING TO USE VI-Plant because THE INVERTER WILL NOT STAY CONNECTED TO THE NETWORK let alone communicate with ANY monitoring solution!

It physically stops communicating until you reboot it 
Regards Colin